| AMI UK217+HA2317 Ball Insert Bearings | D:360 mm; with tapered bore:1 500 min-1; Dynamic (Cr):4.5 mm; Grease:1930 kN; rs (min):2.1 mm; Static (Cor):8.3 mm; B:75 mm; Pu:970 kN; with cylindrical bore:1 100 min-1; Oil:167.620 kN; |
| Link-Belt YG211NL Ball Insert Bearings | h:51.594 mm; H:298.45 mm; Da:250 mm; R2:38.1 mm; P180°:127 kN; J1:85.725 mm; ba:61.119 mm; Bearing limiting speed:3200 r/min; PG:1/4 NPT; J max.:434.975 mm; |
| Link-Belt MCLG248NLPA Ball Insert Bearings | Fillet Radius ra:2.50 mm; Grease Speed Rating n1:1600 rpm; Oil Speed Rating n2:2200 rpm; d:140.000 mm; D:250.0000 mm; Basic Static Radial Load Rating Co:430000 N; Fillet Radius rb:1.00 mm; B:84.00 mm; Basic Dynamic Radial Load Rating C:319000 N; |
| AMI UC206-19MZ2 Ball Insert Bearings | H:140 mm; r1,2 min.:5 mm; d1:705 mm; Limiting speed:360 r/min; Basic static load rating C0:18600 kN; D1:535 mm; Mass bearing:154 kg; Basic dynamic load rating C:3650 kN; Reference speed:180 r/min; Minimum axial load factor A:28; |
| AMI UG310 Ball Insert Bearings | F:70 mm; r, r1,2 min.:1 mm; d:60 mm; Mass inner ring:0.2 kg; B:25 mm; |
| Link-Belt WBG2E20EL Ball Insert Bearings | Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; d:9 mm; Permissible sliding velocity v max.:0.5 m/s; B:10 mm; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.008 kg; Coefficient of friction µ min.:0.08; |
| Link-Belt SG231ELK8299A Ball Insert Bearings | B:17 mm; da:42 min; Oil:11 000 min-1; Da:65 max; Bearing designation:6207 ; Static (Cor):15.227 kN; ra:1 max; Weight:0.284 kg; d:35 mm; rs:1.1 mm; |
| Link-Belt UG226NL Ball Insert Bearings | Mass adapter sleeve assembly:161 kg; Hydraulic nut:HMV 106E; d1:500 mm; G2:M 8; G:Tr 530x6; Lock nut:HM 31/530; Locking device:MS 31/530; A:6 mm; B:80 mm; G3:12 mm; |
| Hub City YW220X1-1/2 Ball Insert Bearings | h:42.862 mm; A2:160.338 mm; R1:63.5 mm; H1:107.95 mm; N1:19.05 mm; H2:44.45 mm; PG:1/8 NPT; Max. speed for PosiTrac Plus seal:2150 r/min; J max.:320.675 mm; H:209.55 mm; |
| AMI UGW202-10 Ball Insert Bearings | a:8 mm; d:180 mm; Mass bushing:8.4 kg; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; B:160 mm; α:124 °; Coefficient of friction µ min.:0.08; D:200 mm; h:182 mm; |
| Link-Belt YBG235NL Ball Insert Bearings | Stabilizing ring:SR-15-0; H1:82.55 mm; Pa:6.94 kN; P90°:59.6 kN; J min.:219.075 mm; h:28.575 mm; Adapter sleeve assembly:SNW 15x2.3/8; Cap bolt recommended tightening torque:149.1 N·m; Ca:37.008 mm; ba:32.544 mm; |
| Link-Belt ER24-EDCFFVA Ball Insert Bearings | d:240.000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:159000 N; Grease Speed Rating Open/Shielded n1:1800 rpm; Basic Static Radial Load Rating Co:196000 N; Oil Speed Rating Open/Shielded n2:2200 rpm; D:320.0000 mm; Sealed Speed Rating n3:1100 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Seals; |